Serving Durham, OR
Landscape Lighting in Durham
Tree lighting along the river and creek corridors, built for Durham's wet ground.
- Licensed, bonded & insured — OR CCB #219290
- Free on-site design consultation
- Solid brass & copper fixtures built for Oregon rain
- In-house crews — design, install & service
Landscape Lighting · Durham
Landscape Lighting in Durham, OR
Durham is one of the smallest incorporated cities in the metro — compact, almost entirely residential, and tucked between Tigard, Tualatin and the Tualatin River. We work here as part of our broader Tigard and Tualatin coverage, and the small scale is an advantage: access and staging are simple, and we know the streets.
Water is the defining feature of outdoor work in Durham. The city is bounded by the Tualatin River and threaded by Fanno Creek, and a meaningful share of lots sit low, drain slowly, or stay saturated through the wet season. That puts unusual weight on what goes below grade. The upside is a mature, well-treed landscape along the river and creek corridors that lights beautifully.
Local Know-How
What Matters in Durham
Below-grade quality matters most
On saturated Durham lots, every connection is sealed and burial-rated, and transformers are mounted well above the wet ground.
Trees along the water
The mature trees along the river and Fanno Creek corridors are excellent subjects for uplighting and moonlighting.
Careful cable routing
We route cable to avoid the lowest, wettest parts of the lot where we can, so the system isn't sitting in standing water all winter.
Reviews
What Homeowners Say
“Other quotes were a fixture count on paper. These guys walked the yard, explained what each light was doing and why, and the plan matched what we got.”
Landscape & Garden Lighting
Mark R.
Lake Oswego
“Our 1912 Craftsman vanished after dark. They lit the columns and the gable and left everything between them dark. The contrast is the whole thing.”
Architectural & Facade Lighting
Jennifer L.
Irvington, Portland
“Steep lot, and the walk down was dangerous in the wet. Staggered path lights plus lights in the step risers — fewer fixtures than we were quoted elsewhere, better result.”
Path & Walkway Lighting
David S.
West Linn
“Half our system had been dark for two years. They found it in twenty minutes — corroded connectors — and told me the transformer was fine. Could have sold me a new one.”
Lighting Repair & Maintenance
Amanda K.
Beaverton
The Work
Landscape & Garden Lighting
How It Works
From Consultation to Installed
Free Design Consultation
We walk your property with you, talk through what you want the space to feel like after dark, and note the trees, architecture, and pathways worth lighting — no pressure, no obligation.
Your Lighting Plan
We put the design on paper fixture by fixture — what gets lit, from where, with which beam spread — and price it as a fixed proposal. Nothing is ordered and no deposit is taken until you've approved it.
Clean, Low-Voltage Install
Our crews hand-dig and tuck 12-volt cable below grade, set transformers discreetly, and mount solid brass and copper fixtures — with your lawn and beds left the way we found them.
Night Aiming & Ongoing Care
We return after dark to aim every fixture by eye, set your timer or app schedule, and walk the finished system with you — then keep it dialed in with optional annual maintenance.
Questions
Landscape Lighting in Durham: FAQ
Can landscape lighting work on a wet Durham lot?
Yes, if it's built for it. On low-lying lots near the Tualatin River or Fanno Creek, we use sealed burial-rated connectors throughout, mount transformers above the wet ground, and route cable away from the lowest areas. Done that way, a system holds up through the wet season.
How much does landscape lighting cost in Portland?
Pricing follows the design — fixture count, transformer size, cable runs, and material. A focused front-yard design with a handful of tree uplights and path fixtures starts in the low thousands; a full wraparound system with multiple zones costs more. Your written proposal breaks out per-fixture pricing so you can scale zones up or down and see exactly what changes.
Why low-voltage instead of standard 120-volt lighting?
Low-voltage 12V systems are safer to work around, far easier to adjust or expand later, and don't require the conduit and permitting that line-voltage work does. The transformer steps household current down at one point, and everything beyond that is low-risk cable you can garden around. It's the standard for residential landscape lighting for good reason.
Will digging the cable damage my lawn and beds?
No. We hand-cut a narrow slit in the turf, tuck the cable below grade, and close it behind us — within a week or two you can't tell where we worked. We route around root zones rather than trenching through them, which matters a lot on Portland lots with mature trees.
What color temperature do you use?
2700K warm white on essentially everything. It flatters bark, stone, and foliage, and it reads as inviting rather than clinical. Cooler temperatures around 4000K make plants look grey and green foliage look sickly. We also keep the temperature consistent across the whole system — mismatched fixtures are the fastest way to make a yard look pieced together.
Light Up Your Durham Landscape
Free design consultation and a fixed-price proposal before anything is ordered.