Lighting Repair & Maintenance

Portland's Outdoor Lighting Specialists

Free Design ConsultationLicensed, Bonded & InsuredSolid Brass Fixtures

Start Your Project

Request a Free Quote

Free design consultation — no obligation.

Lighting Repair & Maintenance

Our Services

Lighting Repair & Maintenance in Portland, OR

Outdoor lighting systems drift. Fixtures get bumped by mowers and settle out of aim, plantings grow up and swallow the light, connectors corrode, transformers fail, and a zone goes dark and stays dark because nobody knows where to start. PDX Outdoor Lighting repairs and maintains outdoor lighting throughout the Portland metro — including plenty of systems we didn't install.

Most service calls come down to a short list of causes. Failed low-quality connectors are the single most common — twist-on wire caps buried in wet Oregon soil corrode and fail, where waterproof silicone-filled connectors don't. After that it's voltage drop on runs that were wired too long or too thin to begin with, transformers that have reached end of life, water intrusion into fixtures that were never properly rated, and simple lamp failure. We diagnose with a meter rather than by guessing, so you find out what's actually wrong instead of paying to replace parts that were fine.

Book a Free Consultation

Reviews

What Our Clients Say

June 2026
Other quotes were a fixture count on paper. These guys walked the yard, explained what each light was doing and why, and the plan matched what we got.

Landscape & Garden Lighting

M

Mark R.

Lake Oswego

May 2026
Our 1912 Craftsman vanished after dark. They lit the columns and the gable and left everything between them dark. The contrast is the whole thing.

Architectural & Facade Lighting

J

Jennifer L.

Irvington, Portland

April 2026
Steep lot, and the walk down was dangerous in the wet. Staggered path lights plus lights in the step risers — fewer fixtures than we were quoted elsewhere, better result.

Path & Walkway Lighting

D

David S.

West Linn

March 2026
Half our system had been dark for two years. They found it in twenty minutes — corroded connectors — and told me the transformer was fine. Could have sold me a new one.

Lighting Repair & Maintenance

A

Amanda K.

Beaverton

Our Work

Lighting Repair & Maintenance Gallery

← Swipe to see lighting repair & maintenance effects we design and build throughout the Portland area.

View Full Gallery

We're also straight with you about what's worth saving. Some systems need an afternoon of connector repairs and re-aiming and will run happily for another decade. Others were built with composite fixtures and undersized cable, and pouring money into them is throwing it away — in which case we'll tell you that plainly and show you what a rebuild costs, rather than selling you a repair we know won't hold.

Learn More

More About Our Lighting Repair & Maintenance Work

One upgrade is worth calling out on its own: converting an older halogen landscape system to LED. Halogen MR16 lamps draw roughly five to seven times the power of an equivalent LED and burn out on a schedule measured in seasons, which on a thirty-fixture system means real money and a recurring afternoon on a ladder. Retrofitting often lets an existing transformer carry substantially more fixtures than before, because the load per fixture drops so sharply — so a conversion frequently pays for expansion you thought you couldn't power.

We repair and maintain outdoor lighting across Portland, Beaverton, Lake Oswego, Tigard, Milwaukie, Gresham, Aloha, and the surrounding metro. Contact PDX Outdoor Lighting to get your system diagnosed and back to full brightness.

Our Process

How We Work

Step 1

Free Design Consultation

We walk your property with you, talk through what you want the space to feel like after dark, and note the trees, architecture, and pathways worth lighting — no pressure, no obligation.

Step 2

Your Lighting Plan

We put the design on paper fixture by fixture — what gets lit, from where, with which beam spread — and price it as a fixed proposal. Nothing is ordered and no deposit is taken until you've approved it.

Step 3

Clean, Low-Voltage Install

Our crews hand-dig and tuck 12-volt cable below grade, set transformers discreetly, and mount solid brass and copper fixtures — with your lawn and beds left the way we found them.

Step 4

Night Aiming & Ongoing Care

We return after dark to aim every fixture by eye, set your timer or app schedule, and walk the finished system with you — then keep it dialed in with optional annual maintenance.

FAQ

Frequently Asked Questions

Can you service a system another company installed?
Yes — that's a large part of what we do. We'll assess whatever's there regardless of who put it in, tell you what's failing and why, and give you options. No obligation to have us rebuild anything.
Why did part of my system go dark?
Most often a failed connector, a lamp at end of life, or voltage drop on an overlong run. Less often a failed transformer or water in a fixture. A section going dark together usually points to one connection upstream, which is exactly the sort of thing a meter finds in minutes and guesswork doesn't.
My lights look dim at the far end of the run. Why?
Voltage drop — the far fixtures aren't receiving enough voltage because the cable is too long, too thin, or too heavily loaded for a single run. Fixes range from re-tapping to a higher transformer voltage terminal, to splitting the run, to re-cabling that leg. We'll measure the actual voltage at the fixture and size the fix to it.
How often should outdoor lighting be maintained?
An annual visit suits most Portland-area systems. Plants grow fast here, moss and debris cloud lenses, and fixtures drift out of aim over a season. Yearly service to re-aim, clean, check connections, and adjust the timer keeps a system looking like it did the week it was installed.
Do you offer maintenance plans?
Yes. Our annual plans cover a scheduled visit with full re-aiming, lens cleaning, connection and transformer checks, timer and schedule adjustment, and a written report — with priority scheduling and discounted parts if something needs replacing.
Portland, OR · Portland metro

© OpenStreetMap

Service Area

Serving the Greater Portland Area

PDX Outdoor Lighting repairs and maintains outdoor lighting systems across Portland, OR and the surrounding metro — including plenty we didn't install. We diagnose with a meter rather than by guessing, and we'll tell you plainly what's worth saving. Serving Portland, Beaverton, Lake Oswego, Tigard, Milwaukie, Gresham, and Aloha.

  • Portland
  • Lake Oswego, OR
  • Beaverton
  • Tigard, OR
  • Tualatin
  • Hillsboro, OR
  • Milwaukie
  • Happy Valley
  • Sherwood
  • Aloha
  • Multnomah County
  • Washington County
View All Service Areas

Light Your Property — Priced Before You Buy

Free design consultation on your property. No pressure, no obligations.

Start a Project
CallGet Quote