Serving Beaverton, OR
Lighting Repair in Beaverton
Builder and box-kit systems diagnosed with a meter, with a straight call on repair versus rebuild.
- Licensed, bonded & insured — OR CCB #219290
- Free on-site design consultation
- Solid brass & copper fixtures built for Oregon rain
- In-house crews — design, install & service
Lighting Repair · Beaverton
Landscape Lighting Repair in Beaverton, OR
A lot of Beaverton landscape lighting went in with the house or came out of a box, and much of it is now ten or twenty years old. In the newer subdivisions that usually means builder-grade fixtures and plastic connectors reaching the end of their life together. In the older neighborhoods it more often means a decent system that has been slowly undermined — roots lifting cable, a bed replanted over a splice, an edger through a run.
We start every Beaverton repair with a meter rather than a guess. Voltage at the transformer and at the furthest fixtures tells us whether we're fixing a few connections or looking at a system that was never built to carry its load. You get a plain answer on which it is before anything gets replaced.
Local Know-How
What Matters in Beaverton
Builder-grade parts failing together
Systems installed with the house in Beaverton's newer subdivisions tend to share one generation of components, so when one fixture goes the rest are rarely far behind. We'll tell you when replacing them piecemeal stops making sense.
Mature roots and replanted beds
In established Beaverton yards the cable is often fine — it's just been lifted by roots or buried under a replanted bed. We trace the run, repair the damage, and reroute it clear of the root zone.
Systems that outgrew their transformer
Fixtures get added over the years and the original transformer stays. Dim, yellow light at the far end of a run is usually an overloaded circuit, not failing bulbs.
Reviews
What Homeowners Say
“Other quotes were a fixture count on paper. These guys walked the yard, explained what each light was doing and why, and the plan matched what we got.”
Landscape & Garden Lighting
Mark R.
Lake Oswego
“Our 1912 Craftsman vanished after dark. They lit the columns and the gable and left everything between them dark. The contrast is the whole thing.”
Architectural & Facade Lighting
Jennifer L.
Irvington, Portland
“Steep lot, and the walk down was dangerous in the wet. Staggered path lights plus lights in the step risers — fewer fixtures than we were quoted elsewhere, better result.”
Path & Walkway Lighting
David S.
West Linn
“Half our system had been dark for two years. They found it in twenty minutes — corroded connectors — and told me the transformer was fine. Could have sold me a new one.”
Lighting Repair & Maintenance
Amanda K.
Beaverton
The Work
Lighting Repair & Maintenance
How It Works
From Consultation to Installed
Free Design Consultation
We walk your property with you, talk through what you want the space to feel like after dark, and note the trees, architecture, and pathways worth lighting — no pressure, no obligation.
Your Lighting Plan
We put the design on paper fixture by fixture — what gets lit, from where, with which beam spread — and price it as a fixed proposal. Nothing is ordered and no deposit is taken until you've approved it.
Clean, Low-Voltage Install
Our crews hand-dig and tuck 12-volt cable below grade, set transformers discreetly, and mount solid brass and copper fixtures — with your lawn and beds left the way we found them.
Night Aiming & Ongoing Care
We return after dark to aim every fixture by eye, set your timer or app schedule, and walk the finished system with you — then keep it dialed in with optional annual maintenance.
Questions
Lighting Repair in Beaverton: FAQ
Will you repair a system someone else installed in Beaverton?
Yes — most of our Beaverton repair work is on systems we didn't install. We test it, show you what we found, and tell you whether it's worth repairing. If the transformer and cable are sound, repair is usually the right call.
Can you service a system another company installed?
Yes — that's a large part of what we do. We'll assess whatever's there regardless of who put it in, tell you what's failing and why, and give you options. No obligation to have us rebuild anything.
Why did part of my system go dark?
Most often a failed connector, a lamp at end of life, or voltage drop on an overlong run. Less often a failed transformer or water in a fixture. A section going dark together usually points to one connection upstream, which is exactly the sort of thing a meter finds in minutes and guesswork doesn't.
My lights look dim at the far end of the run. Why?
Voltage drop — the far fixtures aren't receiving enough voltage because the cable is too long, too thin, or too heavily loaded for a single run. Fixes range from re-tapping to a higher transformer voltage terminal, to splitting the run, to re-cabling that leg. We'll measure the actual voltage at the fixture and size the fix to it.
How often should outdoor lighting be maintained?
An annual visit suits most Portland-area systems. Plants grow fast here, moss and debris cloud lenses, and fixtures drift out of aim over a season. Yearly service to re-aim, clean, check connections, and adjust the timer keeps a system looking like it did the week it was installed.
More in Beaverton
Get Your Beaverton Lighting Working Again
Free design consultation and a fixed-price proposal before anything is ordered.