Serving Durham, OR
Lighting Repair in Durham
Fixing water-damaged connections on low-lying lots near the river and Fanno Creek.
- Licensed, bonded & insured — OR CCB #219290
- Free on-site design consultation
- Solid brass & copper fixtures built for Oregon rain
- In-house crews — design, install & service
Lighting Repair · Durham
Landscape Lighting Repair in Durham, OR
Almost every landscape lighting repair in Durham comes back to water. With the Tualatin River on one side and Fanno Creek running through, a lot of Durham lots sit low and stay saturated through the wet season — and any connection that isn't properly sealed will eventually corrode. The tell-tale pattern is lighting that fails in winter and partly recovers in summer.
We test the whole system with a meter, find the connections and cable that have taken on water, and replace them with sealed, burial-rated parts. Where the transformer or junctions sit in the wettest part of the lot, we move them, so the fix lasts beyond one season.
Local Know-How
What Matters in Durham
Corroded connections
Unsealed splices on saturated ground are the most common failure in Durham. We replace them with silicone-filled burial connectors.
Transformers in the wrong place
A transformer mounted too low takes on moisture. We relocate it above the wet ground where needed.
Seasonal failures
Lights that go out every winter are a moisture problem. Fixing the connections ends the cycle rather than resetting it.
Reviews
What Homeowners Say
“Other quotes were a fixture count on paper. These guys walked the yard, explained what each light was doing and why, and the plan matched what we got.”
Landscape & Garden Lighting
Mark R.
Lake Oswego
“Our 1912 Craftsman vanished after dark. They lit the columns and the gable and left everything between them dark. The contrast is the whole thing.”
Architectural & Facade Lighting
Jennifer L.
Irvington, Portland
“Steep lot, and the walk down was dangerous in the wet. Staggered path lights plus lights in the step risers — fewer fixtures than we were quoted elsewhere, better result.”
Path & Walkway Lighting
David S.
West Linn
“Half our system had been dark for two years. They found it in twenty minutes — corroded connectors — and told me the transformer was fine. Could have sold me a new one.”
Lighting Repair & Maintenance
Amanda K.
Beaverton
The Work
Lighting Repair & Maintenance
How It Works
From Consultation to Installed
Free Design Consultation
We walk your property with you, talk through what you want the space to feel like after dark, and note the trees, architecture, and pathways worth lighting — no pressure, no obligation.
Your Lighting Plan
We put the design on paper fixture by fixture — what gets lit, from where, with which beam spread — and price it as a fixed proposal. Nothing is ordered and no deposit is taken until you've approved it.
Clean, Low-Voltage Install
Our crews hand-dig and tuck 12-volt cable below grade, set transformers discreetly, and mount solid brass and copper fixtures — with your lawn and beds left the way we found them.
Night Aiming & Ongoing Care
We return after dark to aim every fixture by eye, set your timer or app schedule, and walk the finished system with you — then keep it dialed in with optional annual maintenance.
Questions
Lighting Repair in Durham: FAQ
Why does my Durham landscape lighting fail every rainy season?
On low, slow-draining lots near the river and Fanno Creek, unsealed connections fill with water through the winter and corrode. Replacing them with sealed, burial-rated connectors — and moving any transformer that sits too low — stops it happening again.
Can you service a system another company installed?
Yes — that's a large part of what we do. We'll assess whatever's there regardless of who put it in, tell you what's failing and why, and give you options. No obligation to have us rebuild anything.
Why did part of my system go dark?
Most often a failed connector, a lamp at end of life, or voltage drop on an overlong run. Less often a failed transformer or water in a fixture. A section going dark together usually points to one connection upstream, which is exactly the sort of thing a meter finds in minutes and guesswork doesn't.
My lights look dim at the far end of the run. Why?
Voltage drop — the far fixtures aren't receiving enough voltage because the cable is too long, too thin, or too heavily loaded for a single run. Fixes range from re-tapping to a higher transformer voltage terminal, to splitting the run, to re-cabling that leg. We'll measure the actual voltage at the fixture and size the fix to it.
How often should outdoor lighting be maintained?
An annual visit suits most Portland-area systems. Plants grow fast here, moss and debris cloud lenses, and fixtures drift out of aim over a season. Yearly service to re-aim, clean, check connections, and adjust the timer keeps a system looking like it did the week it was installed.
Get Your Durham Lighting Working Again
Free design consultation and a fixed-price proposal before anything is ordered.